Brief description of CNC machining center maintenance methods

1. Daily cleaning and cleaning of machine tool dust iron scraps: including machine control panel, spindle taper hole, tool cart, cutter head and taper shank, tool magazine arm and tool holder, turret; XY axis sheet metal shield, machine tool Inner flexible hose, tank chain device, chip groove, etc.;

2. Check the lubricant level to ensure the lubrication of the machine;

3. Check if the coolant in the coolant tank is sufficient, not enough to add it in time;

4. Check if the air pressure is normal;

5. Check if the air blowing in the taper hole of the spindle is normal, wipe the cone inside the spindle with a clean cotton cloth, and spray light oil;

6. Clean the tool pocket and the tool, especially the claws;

7. Check all the signal lights, whether the warning lights are normal;

8. Check the oil pressure unit tube for leakage;

9. The cleaning and cleaning work is carried out after the daily work of the machine tool is completed;

10. Keep the environment around the machine clean and tidy.

Next:Brief Analysis of Common Faults and Treatment of CNC Lathes